རེའུ་མིག་
Shows commands to insert, edit, and delete a table and its elements inside a text document.
རེའུ་མིག་གསར་པ་བསྒར་འཛུད་བྱེད།
བསྒར་འཛུད།
Opens a submenu with the following command options:
Rows Above
Insert a row above the row where the cursor is currently placed.
Rows Below
Insert a row below the row where the cursor is currently placed.
Opens dialog box for inserting rows.
Columns Before
Inserts a column before the column where the cursor is currently placed.
Columns After
Inserts a column after the column where the cursor is currently placed.
Opens dialog box for inserting columns.
སུབ་པ།
Opens a submenu with the following command options:
ཕྲེང།
འདེམས་ངེསངེས་ཕྲེང་སུབ།
སྟར།
འདེམས་ངེསངེས་སྟར་སུབ།
རེའུ་མིག།
Deletes the current table.
འདེམས།
Opens a submenu with the following command options:
དྲ་མིག།
Selects the current cell.
ཕྲེང།
མིག་སྔའི་ཕྲེང་འདེམས་པ།
སྟར།
མིག་སྔའི་སྟར་འདེམས་པ།
རེའུ་མིག།
མིག་སྔའི་རེའུ་མིག་འདེམས་པ།་
Size
Opens a submenu with the following command options:
ཕྲེང་མཐོ།
"ཕྲེང་མཐོ་"གླེང་སྒྲོམ་ཁ་ཕྱེས་ གླེང་སྒྲོམ་ནང་ཕྲེང་མཐོ་བཟོ་བཅོས་བྱེད།
Minimize Row Height
Set the row height to the smallest possible for the content in each selected row.
རང་འགུལ་གྱི་ཕྲེད་ཀྱི་མཐོ་ཚད་འགྱུར་བ་ནས་ ཚད་མཐུན་རྐྱང་སྒྲོམ་ཀྱི་ནང་དོན་ལེན་པ་འདི་ནི་གསར་འཛུགས་བྱས་པའི་རེས་འགོད་
Adjusts the height of the selected rows to match the height of the tallest row in the selection.
Column Width
"སྟར་ཞེང་"གླེང་སྒྲོམ་ཁ་ཕྱེས་ གླེང་སྒྲོམ་ནང་སྟར་ཞེང་བཟོ་བཅོས་བྱེད།
Minimize Column Width
Set column width to the smallest possible for the content in each selected column.
རང་འགུལ་གྱི་ཚང་གི་ཞེང་ཚད་ལེགས་སྒྲིག་གིས་དྲ་མིག་གི་ནང་དོན་དང་འཚམས་དགོས་ཚང་གཅིག་གི་ཞེང་ཚད་བཟོ་བཅོས་བྱས་ན་ རེའུ་མིག་ནང་གི་ཚང་གཞན་གྱི་ཞེང་ཚད་ལ་ཤུགས་རྐྱེན་མི་ཡོང་འོན་ཀྱང་རེའུ་མིག་གི་སྤྱིའི་ཞེང་ཚད་ཤོག་ངོས་ཀྱི་ཞེང་ཚད་ལས་བརྒལ་མི་མཆོག།
Adjusts the width of the selected columns to match the width of the widest column in the selection. The total width of the table cannot exceed the width of the page.
Combines the contents of the selected cells into a single cell, retaining the formatting of the first cell in the selection.
Displays the Split Cells Dialog where the split can be defined as either horizontally or vertically and the number the each cell will be split into.
Combines two consecutive tables into a single table. The tables must be directly next to each other and not separated by an empty paragraph.
འོད་རྟགས་གནས་པའི་སར་མིག་སྔའི་རེའུ་མིག་ཁེར་རྐྱང་རེའུ་མིག་གཉིས་ལ་ དབྱེ་ཕྲལ་བྱ་དགོས།
Protect Cells
འདེམས་ངེས་ཀྱི་དྲ་མིག་ནང་དོན་བཟོ་བཅོས་དགོས་པ།
Unprotect Cells
མིག་སྔའི་རེའུ་མིག་ནང་གི་དྲ་མིག་ཙཙ་མའི་སྲུང་སྐྱོབ་དོར་བ།
Automatically applies formats to the current table, including fonts, shading, and borders.
རྩོམ་སྒྲིག་གྲངས་ཀའི་རྣམ་གཞག།
Opens a dialog where you can specify the format of numbers in the table.
Toggles the setting for automatically recognizing numbers or dates that you enter into a table cell, converting them from text to an appropriate number format.
Header Rows Repeat Across Pages
Repeat a table heading on each new page that the table spans.
Rows to Break Across Pages
Allows a page break or column break inside a row of the table. This option is not applied to the first row in a table if the Repeat Heading option is selected.
བརྗེ་སྒྱུར།
Opens a submenu with the following command options:
ཡིག་དེབ་རེའུ་མིག་ལ་བརྗེ་སྒྱུར་བྱེད།
"ཡིག་དེབ་རེའུ་མིག་ལ་བརྗེ་སྒྱུར་བྱེད་"གླེང་སྒྲོམ་ཁ་ཕྱེས་ གཞན་ཡང་འདེམས་ངེས་ཀྱི་ཡིག་དེབ་དེ་རེའུ་མིག་ལ་བརྗེ་སྒྱུར་བྱེད།
རེའུ་མིག་དེ་ཡིཡི་དེབ་ལ་བརྗེ་སྒྱུར་བྱེད།
"རེའུ་མིག་ཡིག་དེབ་ལ་བརྗེ་སྒྱུར་བྱེད་"གླེང་སྒྲོམ་ཁ་ཕྱེས་ གཞན་ཡང་མིག་སྔའི་རེའུ་མིག་དེ་ཡིག་དེབ་ལ་བརྗེ་སྒྱུར་བྱེད།
Text Formula
Opens the Formula bar to enter or edit a formula.
ཡིག་འབྲུའི་གོ་རིམ་ཨང་ཀའི་གོ་རིམ་ཐོག་འདེམས་ངེས་པའི་དུམ་མཚམས་ལ་རིམ་སྒྲིག་བྱ་མང་ཤོས་ལ་རིམ་སྒྲིག་འགན་གནད་ཡི་གེ་གསུམ་མཚན་འཇོག་པ་མ་ཟད་རིམ་སྒྲིག་འགན་གནང་ཡི་གེ་དེ་ཡིག་འབྲུ་དང་ཨང་ཀི་ཚོ་སྒྲིག་ཆོག་
Specifies the properties of the selected table, for example, name, alignment, spacing, column width, borders, and background.